Safety, Quality, & Certifications
PennFab Puts Safety And Quality First!
We continually work on a day to day basis to and within a wide range of industry Standards and Governing bodies including but not limited to the AWS, AISC, ASTM, ASM, NYDOT, AREMA, MILL-STD, NAAMM, AASHTO, OSHA among others.
We are proudly certified with AISC as well as PennDOT. We can provide any level of Quality Control and testing required, both through in house procedures and outside NDT examiners.
Safety is paramount and is always our first order of business, whether it is protecting our employees or assuring that we provide you with a safe and reliable product. Make no mistake about it; nothing will leave our facility if we don’t consider it safe, nor will it be shipped or loaded in an unsafe manner.
Machines and Equipment
Morrisville Facility Specs:
- Size- 230,000 ft2 (21,368 m2)
- Bays – 600’ (183 m) Long | 80-100’ (24-30.5 m) Wide
- Cranes – 6, 10-30 Ton Capacity (9-27,000 Kg)
- Loading docks – 3
- Drive-in doors – 7
- Transport Access – Major Highways, Rail Service, Deep Water Port
Ivyland Facility Specs:
- Size – 60,000 ft2
- Bays – 6
- Cranes – 5 (5 Ton Capacity), 1 (10 Ton Capacity)
- 1 Loading dock
- Drive-in doors – 6
Our Equipment
- View All Types
- Drilling & Milling
- Plate & Angle Rolling
- Plate Processing
- Press Brakes & Bending
- Punching & Ironworking
- Saws & Cutting
- Surface Preparation & Finishing
- Welding
JM Montgomery Model 33 Angle Roller
- Hydraulic profile/angle rolling machine
- 10 HP motor @ 1,755 RPM
- Angle capacity: 3″ × 3″ × 3/8″
- Minimum inside diameter (ID): 33″
- Pipe capacity: 3½” (with proper tooling)
Blast/Paint Booth
- Skat Blast
- 3′ High × 6′ Wide × 3′ Deep
- Handles small to medium fabricated parts
- Blast Booth
- 8′ High × 8′ Wide × 17′ Long
- Large fabricated weldments
- Paint Booth
- 12.5′ High × 10′ Wide × 27′ Deep
Messer HPR400XD Metal Master Plus Burning Table
- Cutting system: Hypertherm HPR400XD plasma
- Cutting methods:
- High-definition plasma
- Oxyfuel cutting head
- Capacity: 45′ long × 10′ wide
- 1½” thick for plasma
- 3″ thick for oxyfuel
Ikeda Drill Press
- Type: Radial arm drill press
- Spindle speed range: 30–1500 RPM
- Spindle taper: Morse Taper #5 (MT5)
- Motor power: 7.5 HP
- Arm reach: 4 ft radial arm
- Column diameter: 13.6 in
Cincinnati Bickford Drill Press
- Function: Drilling, reaming, tapping, light boring
- Radial arm design
- Adjustable reach over large parts
- Spindle speed range: 60–1250 RPM
- Morse Taper #4 (MT4)
- Large, heavy-duty spindle taper
HYD-MEC Saw
- Primary machine used to cut material to size
- Miter capacity: 45° left and right
- Maximum capacity: ~20″ × 25″
- Blade size: 1.25″ width × .042″ thickness
- More modern controls and easier programming than the HEM Saw
Hem Saw V100LA4
- Fully automatic vertical band saw with mitering capability
- Cutting capacity: 26 1/2″ width × 25 1/2″ height
- Round capacity: Up to 18″ diameter
- Cuts up to 45° left and right
Mubea Iron Worker HIW 750
- 82-ton punching capacity
- 20-inch throat depth
- 6″ × 6″ × 1/2″ angle shear
- Typical punching: ~1-1/4″ hole in 13/16″ steel
- Used for:
- Structural steel cutting
- Hole punching
- Notching
Standard Industrial Shear
- Maximum capacity: 1/4″ thick × 10 ft wide
- Maximum capacity: 1/4″ thick × 10 ft wide
- Stainless capacity: Up to 10 gauge (~0.135″)
- Shearing force: 36 tons
- Backgauge: Varies by setup
1971 Pacific Shear
- Maximum capacity: 3/8″ thick × 12 ft wide
- Backgauge depth: 36″
- Used to cut flat sheet or plate metal
- Hydraulic cylinders drive the blade
Baykal APHS 511000 1000 Ton Press Brake
- CNC servo-hydraulic press brake
- Tonnage: 1000 tons
- Bending capacity: 2″ thick × 16′ 7″ wide
- Built to minimize deflection under load
Pacific K500-14 500 Ton Press Brake
- Heavy-duty hydraulic press brake
- Tonnage: 500 tons
- Capacity: 5/8″ thick × 14 ft wide
- Stroke length: 12″
- Open height: 22″
- Throat depth: 19″
Accurpress 725012 250 Ton Press Brake
- Heavy-duty horizontal profile/angle rolling machine
- ~10 HP motor @ 1,755 RPM
- Angle capacity: 5″ × 5″ × 1/2″
- Pipe capacity: limited (example: 1½” aluminum pipe, tooling-dependent)
Heller HV 3075 Angle Roller
- Hydraulic profile/angle rolling machine
- 10 HP motor @ 1,755 RPM
- Angle capacity: 3″ × 3″ × 3/8″
- Minimum inside diameter (ID): 33″
- Pipe capacity: 3½” (with proper tooling)
Racine Dozer 500 Ton & 250 Ton Bending Machine
- Bending force: ~500 tons
- Hydraulic operation
- Capacity:
- 38″ section height
- 13″ diameter / section size (varies by shape)
- Designed to bend large structural shapes
Waldemar WDM 100-7-6
- 3-roll initial pinch plate bending machine
- Hydraulic operation
- Instant start / stop / reverse
- Capacity: 5/16″ thick × 6 ft wide plate
Faccin HAV-3138 Heavy-Duty Roller
- Variable geometry 3-roll design
- Heavy plate / high-tonnage roller
- Fully hydraulic system
- Capacity: 1¾” thick × 10 ft wide plate
- Performs best with large diameter rolling
Waldemar WDM 403-12-10 Roller
- 4-roll double pinch plate bending machine
- Capacity: 1/2″ thick × 10 ft wide
- Fully hydraulic operation
Miller Welding Machines
- 18 Machines
- MIG (Wire Feed) Welders
- Flux-Cored (FCAW)
- Output: up to 450 amps DC
- Duty cycle: 100% @ 450A (can run nonstop)
- Power: 3-phase (230/460/575V)
- Type: Constant Voltage (CV)
Lincoln Electric 1000 Amp Sub Arc Machine
- Semi-Automatic
- Lincoln Electric Cruiser Submerged Arc Welding Tractor
- Output range: up to ~1000 amps
- Submerged Arc Welding System
- Extremely high deposit rate
- Deep penetration
- Clean weld environment
36″ Do-All Vertical Band Saw
- Blade speed: ~50 to 5200 FPM (variable)
- Blade width: 1/16″ to 1″
- Throat capacity: ~35.5″–36″
- Max work height: 13″
- Table size: ~24″ × 24″
- Tilting table: 45° right, 10° left
Baileigh Vertical Mill VM-942E-16
- Table size: 9″ × 42″
- Spindle speed: ~60–2760 RPM (8 speeds)
- Load capacity: 770 lbs
- 5″ thick steel with one pass
Webb Pinch Forming Roll
- Capacity: 1/4″ thick × 6′ wide
- Type: 3-roll initial pinch machine
- Manual Control
- Extremely Durable
Mubea Ironworkers KBLH 700
- 77-ton punching capacity
- 20″ throat depth
- 8″ × 7/8″ flatbar shear
- 6″ × 6″ × 1/2″ angle shear
- Hole punching: 1-1/4″ hole in 3/4″ steel
- Notching capacity: 3″ thick
Bay-Lynx Cambering Machine
- Press Force: 470 tons @ 4000 psi
- Cold Mechanical Bending
- Max Beam Size: W36 × 260
- Typical range handled:
- Beam depth: 6″–36″
- Flange width: up to 18″
Hem Vertical Band Saw
- Cuts up to 60° both directions
- Fully automatic operation
- Bar feed: up to 48″ per stroke
- Capacity:
- Rectangular: 18″ W × 20.75″ H
- Round: 18″ diameter
- Square: 18″ × 18″
Messer MetalMaster Xcel Plasma Machine
- CNC gantry-style thermal cutting machine
- Cuts: Mild steel, stainless, aluminum
- Thickness: 2″ thick depending on process
- Accuracy: ±0.002″ over 80″ travel
- Cutting size:
- Widths: 8′
- Lengths: 20 ft
Cincinnati Shear
- Can handle 3/8″ thick × 12′ long
- Used to cut flat sheet or plate
- Key features:
- Hydraulic cylinders drive blade
- CNC / programmable back gauge
- Adjustable rake angle
- Variable stroke length
Pacific Hydraulic Press Brake
- 300 ton force
- 12 ft working width
- Max Thickness:
- Full length (12 ft wide): ~1/4″
- Short pieces (2–4 ft): ~1/2 inch
Peddinghaus Plate Processor HSFDB-2500/B
- Plasma and Oxy-Fuel Cutting System
- 8-Station Tool Changer
- Drilling Capacity: 3-1/4″ Thick Plate
- Plasma Cutting Capacity: 2-1/2″
- Oxy-Fuel Cutting Capacity: 3-1/4″
- Plate width capacity: 98″
Peddinghaus Anglemaster-643 Q
- Angle capacity: up to 6″ × 6″ × 5/8″
- Minimum angle: 1½” × 1½” × 1/8″
- Flat bar capacity: 6″ wide × 5/8″ thick
- 230 ton single-cut shear
- Dual Tool: 75 Ton Punch Presses
- Max hole size: 1-1/2″
Peddinghaus PCS 1100/3C Advantage-2 Drill Line
- Capacity: 44″ Wide × 18″ Tall
- Minimum profile: 2″ Wide × 3/4″ Tall
- Max part weight: 18,000 lbs
- Max hole diameter: 1-9/16″
- 25 HP spindle motors
Peddinghaus 1100 DG Double Miter Twin Column Heavy Duty Band Saw
- Cutting capacity (round): 20″
- Cutting capacity (rectangular): 43″ × 20″
- Cut: 60° Angle
- Double Miter Cutting
- Machine footprint
- Weight: 11,000–12,000 lbs
- Length: 14–15 ft body (longer with conveyors)
Recent Insights
The Key Differences Between Welding & Fabrication
The terms “welding” and “metal fabrication” are often used interchangeably. However, it’s worth noting…
The Main Differences Between Our Three Types of Welding
When you come to PennFab for your next fabrication project, you want a clear idea of our…
What Role Do Automatic Welding Machines Play at PennFab?
Several complex processes and disciplines work together during the metal fabrication process to bring…
Testimonials / Reviews
“Frankly, you are one of the few companies that really do care about what you do and it shows in your every action. I wish you could handle every fabrication job we do.”
– Project Manager, Multi-Million North East Construction Project
“The degree of professionalism and level of quality is second to none”
– VP/General Manager, Fortune 500 Company
“Mike Mabin and his employees at PennFab represent what a company can achieve when they continually set the bar higher. You are no doubt one of the finest companies in our County and I am proud to deliver this Proclamation naming July 28, 2003 PennFab, Inc. day, on this your 20th Anniversary.”
– Chairmen of the County Commissioners
“I so much respect the bedrock of your philosophy—hard work, smart work and an uncompromising sense of doing the right thing. ‘It is in giving that we receive’, says Saint Francis. If he is as dead on as I think he is, than PennFab’s destiny is a rosy one.”
– VP International Equipment Manufacture
“Every time I’m in this plant and see the level of Quality and Pride your company has it aggravates me to no end that we can’t just give you every job we have to fabricate.”
– Director of Operations, Rail Industry
“You guys are the Best! Period. Without exception. No one does what you do.”
– President/COO, International Construction Company
“PennFab is a World Class fabrication company and without their help we could not have obtained the level of expertise and craftsmanship that we did.”
– Chief Engineer of a Rail Transit company
“We could not have accomplished the growth that we have had in the last ten years without PennFab’s dedication to Quality, Competitiveness and all around customer satisfaction.”
– VP and General Manager, OEM Account
















































































